Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Irvine, CA
Gate installation in Irvine means working with the city’s HOA-governed villages, not against them. We install driveway gates, pedestrian gates, and electric access systems across Woodbridge, Northwood, Turtle Rock, Westpark, and the Great Park villages, matching the architectural standards those communities enforce. Irvine’s dry, sunny climate and Santa Ana winds demand powder-coated steel and aluminum that hold up to UV exposure, dust, and occasional winter rain. If your gate needs replacing or you’re adding one to a new build, call First Light Gate Repair at (833) 734-5599 for a free measure and written price.
Why Irvine Homes Are Different
Irvine is a master-planned city built almost entirely by the Irvine Company since the 1970s. That means neighborhoods like Woodbridge, Northwood, and Turtle Rock share something older cities don’t have: near-identical gate styles repeated across hundreds of homes in a single tract. A wrought-iron pedestrian gate in Westpark is often the same factory profile as two dozen others on the same street. For gate installation work, that’s an advantage. Our technicians stock factory-matched latch profiles, hinge sets, and picket styles for the common builds, which shortens lead time and keeps the finished gate looking like it belongs. But it also means visible-from-the-street installations and replacements usually need architectural-committee approval through the HOA first. We’ve worked inside those rules since 2014, so we know how to sequence the paperwork and the install without stalling the project.
Climate matters too. Irvine’s Mediterranean sun fades powder coating and oxidizes bare iron within a few seasons. The Santa Ana winds drive grit into hinges and operators. And the rare winter downpours reveal drainage problems at gate posts that nobody noticed in July. When we install a gate in Irvine, we seal posts against water intrusion, use hardware rated for sustained UV exposure, and set operators on mounting pads that won’t shift when the clay soil expands and contracts.
Styles & brands we work with
Our Main Irvine Services
Most Irvine calls start with one of two problems: a gate that won’t open, or an electric system that stopped responding. Here’s what each involves in this city.
Gate Repair in Irvine
A sagging driveway gate in Northwood or a stuck pedestrian latch in Turtle Rock usually traces back to hinge wear, post movement, or years of UV exposure on the frame. Irvine’s HOA-governed tracts keep gate styles uniform, so we often carry the exact replacement hinge, roller, or latch profile on the truck. We quote the price before any work starts, so you’re not surprised by the invoice. For the full breakdown of repair work and pricing, see Gate Repair in Irvine.
Electric Gate Repair in Irvine
Electric gates in Irvine fail differently than manual ones. The control boards sit in direct sun on south-facing walls, Santa Ana dust works into the operator housing, and power surges during heat waves knock out boards. We diagnose the motor, the board, and the operator, not just the obvious part. Brand-agnostic troubleshooting across LiftMaster, FAAC, and Linear means we fix what’s there rather than pushing a replacement you don’t need. Details are on the Electric Gate Repair in Irvine page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Irvine
Gate installation in Irvine is fundamentally different from installation in older cities like Santa Ana or Tustin. There, gates are often one-off custom builds. Here, the Irvine Company and HOA boards specified identical gate styles across entire villages, which means the gate you saw three streets over in Westpark is likely the same make and model your HOA will approve. That’s good news. We can pull the approved spec, order the factory-matched panels and hardware, and schedule the install without a six-week design detour. The other reality is the climate. Irvine’s UV load demands powder-coated aluminum or properly primed steel from day one, because a cheap paint job will chalk and peel within two summers. We also set posts deeper in Irvine’s clay soil, which moves more than most homeowners expect. For the full scope of this service, see Gate Installation.
Automatic Gate Installation
Signs you need it
Your home has a long setback from the street, your HOA requires a closed driveway, or you’re tired of manually swinging a gate every time you leave.
What it costs in Irvine
Automatic gate installation in Irvine typically runs $2,800 to $9,500, with single swing gates at $2,800 – $5,500 and sliding gates at $4,000 – $9,500 depending on length and operator duty.
How we do it
We verify the HOA spec, pour a reinforced operator pad, mount the arm or slide track, install the motor and control board, and wire loop detectors or photo eyes for safety.
Driveway Gate Installation
Signs you need it
Your driveway is wide enough to need a substantial gate, or the existing one is rusted through at the bottom rail and the posts are drifting.
What it costs in Irvine
Driveway gate installation in Irvine typically runs $2,800 to $14,000, with steel swing gates starting around $2,800 and custom double-swing builds with operators reaching $8,000 – $14,000.
How we do it
We remove the old gate, dig and set new posts with concrete, hang the new leaf or panels, adjust the reveal, and test the full swing arc at least twenty cycles.
Sliding Gate Installation
Signs you need it
Your driveway slopes uphill, your setback is too tight for a swing arc, or your existing slide track has pitted and the gate jerks when it moves.
What it costs in Irvine
Sliding gate installation in Irvine typically runs $4,000 to $9,500, with the track, rollers, cantilever frame, and motorized operator included in that range.
How we do it
We set the track on a level concrete base, assemble the gate frame, mount the rollers, install the drive chain or rack, and program the limit switches.
What Gate Installation Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Single swing gate with operator | $2,800 – $5,500 |
| Sliding gate with track and motor | $4,000 – $9,500 |
| Custom double-swing with operator | $8,000 – $14,000 |
Does Irvine require a permit for a new driveway gate?
Most Irvine HOA-governed villages require architectural-committee approval for any gate visible from the street, and the city may require a permit for the electrical run to the operator. We flag the paperwork before installation begins.
How long does a gate installation take in Irvine?
A standard single swing gate with operator runs three to five working days from approved spec to final test. Custom sliding builds run longer when posts and concrete curing are involved. Call (833) 734-5599 for a schedule.
Brands We Service in Irvine
We repair and install LiftMaster, FAAC, BFT, and Linear operators, plus five other major gate brands. We stock common control boards, arms, and remotes for these platforms locally, which means many Irvine repairs finish in one visit rather than two. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Manual gate hinge repair | $160 – $350 |
| Gate wheel or roller replacement | $140 – $280 |
| Welding repair to steel gate frame | $180 – $420 |
| Electric gate operator troubleshooting | $150 – $450 |
| Control board replacement | $350 – $950 |
| Safety sensor (photo eye) replacement | $160 – $340 |
| Automatic gate installation (single swing) | $2,800 – $5,500 |
| Sliding gate installation | $4,000 – $9,500 |
What pushes cost up in Irvine is HOA visibility. A gate facing the street in Woodbridge or Northwood may need a specific finish and picket profile to match the tract, and that factory finish costs more than a standard primed panel. Whatever the number, we quote it in writing before the first tool comes off the truck, and the price doesn’t change unless the scope does.
Neighborhoods We Serve in Irvine
First Light Gate Repair has served Irvine since 2014, covering every major village in the city. Most calls inside Irvine get a same-week appointment, with repair emergencies seen sooner when dispatch allows.
- Woodbridge
- Northwood
- Turtle Rock
- Westpark
- Great Park
Service Area – Cities Near Irvine
Our Irvine crew also covers the surrounding Orange County area. We work in Tustin, CA where gates are often older custom builds, in Santa Ana, CA with its mix of wrought iron and commercial access systems, in North Tustin, CA on larger estate properties, and in San Joaquin Hills, CA where hillside driveways change gate geometry.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irvine
We prioritize non-working driveway gates where a vehicle is stuck inside or outside, and we usually reach Irvine neighborhoods same-day or next-morning. Call (833) 734-5599 and we’ll give you a straight arrival window without padding.
Repairs that match the original gate’s look and hardware typically don’t need committee sign-off, but any visible replacement or finish change often does. We’re familiar with the CC&R language used by Woodbridge, Westpark, and Great Park associations and we’ll tell you which job triggers a review before we start.
Yes. We cover all four Irvine ZIP codes: 92617, 92618, 92619, and 92620, including the Spectrum area, Portola Springs, and the Great Park villages. Call (833) 734-5599 for a free estimate any day of the week.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Carmen Vargas"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Luis Rodriguez"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Alejandro Guzman