Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pomona
An electric gate in Pomona that won’t open isn’t just an inconvenience. It blocks your driveway, stalls your morning, and leaves your property less secure. Most calls we take from Pomona homeowners involve one of three things: a dead motor, a control board that stopped responding, or a gate that drags and binds because the post shifted in clay soil. We diagnose those problems daily across ZIPs 91766, 91767, 91769, and 91797. If your gate isn’t working right now, call (833) 734-5599 and we’ll get a technician headed your way.
Why First Light Gate Repair Is Pomona’s Preferred Electric Gate Repair Company
We’re a gate-only shop. That matters in Pomona, where the housing stock skews older and the gates do too. Many of the operators we see in 91766 and 91767 were installed when the homes were built, sometimes 40 or 50 years ago. Glen Pacheco built First Light around one idea: know every major gate brand well enough to fix it right, not just swap parts until something works. Our technicians carry diagnostic experience across LiftMaster, FAAC, BFT, and Linear platforms, plus five other brands, so we’re not guessing when we open the operator cover.
Pomona homeowners call us because we speak the language of their specific gate. A Mighty Mule opener on a ranch-style gate off Garey Avenue gets the same focused attention as a commercial DoorKing system managing entry for a small business on Mission Boulevard. We don’t split our techs across garage doors, fences, or plumbing calls. Your gate is the only thing we fix. That focus means we’ve seen the failure patterns specific to Pomona’s soil and heat, and we stock the parts that fail most often here. When you call (833) 734-5599, you reach a company that knows what a Pomona gate looks like before we even arrive.
Styles & brands we work with
Electric Gate Motor in Pomona
Electric gate motor replacement in Pomona typically runs $450 to $1,100 depending on the operator type and whether we’re swapping like-for-like or upgrading an obsolete unit. We handle swing gate motors, slide gate motors, and the full operator assembly. In Pomona’s older neighborhoods, we often find motors still running but working far harder than they should because the gate itself has sagged or the post has shifted. A new motor won’t fix a dragging gate. Our techs check the whole system before recommending a motor replacement.
Swing Gate Operators in Older Tract Homes
In the pre-1980 tract homes around Holt Avenue and north Pomona, swing gate operators are often paired with wooden gates hung on posts set directly into clay soil. When the motor strains, the real culprit is frequently the post footing, not the motor itself. We re-set posts, correct gate alignment, and then match the operator to the actual weight and swing arc of the gate. This prevents the new motor from burning out in two seasons from overwork.
Slide Gate Motors and Rack Alignment
Slide gates in Pomona present a different set of problems. Clay soil expansion from winter rains tilts the concrete pad or shifts the track, and the gate’s rack and pinion starts grinding against the drive gear. We replace slide gate motors, but we also re-align the rack, re-secure the track, and set the limit switches correctly. A well-aligned slide gate should roll almost silently. Grinding means metal-on-metal stress that will destroy a new motor quickly.
Gate Access Control in Pomona
Gate access control repair in Pomona usually costs between $180 and $650, covering keypad replacement, remote programming, intercom repair, and control board work. When the board fails, the gate doesn’t respond to any input, not remotes, not keypads, not the intercom. We see this constantly in Pomona’s older properties, where original access control hardware has no modern entrapment protection and limited replacement parts.
Retrofitting Legacy Keypads and Intercoms
Older Pomona gates often have hardwired keypads and intercoms that are no longer manufactured. We can retrofit modern keypad systems onto existing operators without tearing out the whole gate assembly. That includes new digital keypads, wireless intercoms, and phone-based entry systems. The goal is to keep your existing gate and motor where they still work, and replace only the access components that have failed or gone obsolete.
Control Boards and UL 325 Compliance
This is the big one for Pomona’s older housing stock. Control boards manufactured before UL 325 entrapment protection standards became mandatory are everywhere in this city. The motor may still run fine. The gate may open and close. But if there’s no photo eye, no reversing edge, no auto-reverse, the system doesn’t meet current safety code. When we repair or replace a control board in Pomona, we always recommend bringing the gate into UL 325 compliance at the same time. It’s usually a few hundred dollars in parts and labor, and it’s not optional if a child or pet is ever near the gate.
Trusted Brands We Service in Pomona
First Light Gate Repair works on nine major gate brands, and we stock common service parts in our vehicles for Pomona calls. We diagnose and repair LiftMaster and FAAC operators regularly. We also service BFT and Linear systems across residential and commercial sites. Beyond those four, our techs carry working knowledge of Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule platforms. Brand-agnostic troubleshooting means we’re not tied to one manufacturer’s playbook. When a BFT board fails but the FAAC motor is fine, we tell you exactly that, and we fix the board, not sell you a full system replacement. For Pomona customers, that often means we can pull a part and be on-site the same day rather than ordering from a distant warehouse.
Common Electric Gate Repair Problems We See in Pomona Homes
- Obsolete control boards in legacy operators. Pre-UL 325 boards from the 1980s and early 1990s fail without warning and often can’t be repaired. We quote retrofit boards with modern safety features so you don’t pay for a full operator replacement when only the brain died.
- Clay soil shifting gate posts and footings. Winter rains in Pomona make the clay under concrete footings expand and move. Swing gates start dragging on the lock side, slide gates grind against the rack. We re-set posts in properly compacted base and re-align the gate so the operator isn’t fighting the soil every cycle.
- Summer heat cracking wooden gates and frying electronics. Pomona sees 100°F+ days through July, August, and September. Wooden gates dry out, crack at the hinge mortises, and pull screws loose. Control boards and capacitors inside metal operator boxes degrade faster in that heat. We replace heat-damaged components and reinforce gates before hinge failure tears out the stucco.
- Stucco wall cracking around gate post anchors. In older Spanish Colonial and mid-century ranch homes across 91766 and 91767, gate posts are often lagged into stucco over wood framing. Years of gate movement hairline-crack the stucco. We inspect anchor points on every repair call and reinforce them before re-hanging the gate.
One more thing worth knowing. In Pomona’s pre-1980 tract homes, a common call goes like this: the gate stopped responding to the remote, but the motor hums. That’s almost always a control board failure. In this housing stock, the original operator control boards predate UL 325 entrapment protection. Even when the motor still runs, those boards are a safety liability. That’s why we push for safety upgrades as part of the repair, not as an upsell.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Pomona, CA
We believe in telling you the number before we start, not after. A diagnostic visit in Pomona runs $75 to $125, and we credit that toward the repair if you proceed. Control board replacement typically costs $250 to $650 depending on the operator brand and whether we’re adding safety photocells. Gate motor replacement lands between $450 and $1,100. Keypad and remote programming is $85 to $180. Full access control retrofits with new keypad and intercom run $350 to $700. Every price is quoted and agreed before any work begins. Call (833) 734-5599 for a free phone estimate, and we’ll give you a real number, not a mystery range that balloons after we arrive.
We Also Serve Cities Near Pomona
First Light Gate Repair handles Electric Gate Repair calls across the Pomona Valley and surrounding areas. We regularly serve Los Serranos, Chino, Brea, and Yorba Linda. If you’re just outside Pomona in any of those communities, the same gate-focused team covers you. For details on our full service area and what we fix, check Electric Gate Repair in Pomona or call us directly at (833) 734-5599.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pomona
Yes, in most cases you can retrofit photo eyes, safety edges, and a compliant control board onto an older swing or slide gate operator without replacing the motor and gearbox. We install UL 325-compliant retrofit kits on legacy operators in Pomona’s tract homes regularly. The cost typically runs $300 to $600 including parts and labor, far less than a full operator replacement. Call (833) 734-5599 and we’ll tell you exactly what your setup needs.
Because Pomona’s clay soil expands when wet, pushing against your gate post footings and shifting them out of plumb. The gate moves just enough to drag on the pavement or bind against the latch post. It’s not the gate warping, it’s the post moving. We correct this by re-setting the post in compacted base rock and re-hanging the gate so the lock side clears properly. This is one of the most common repairs we do in ZIPs 91766 and 91767 from January through March.
Heat shortens the life of control board capacitors, power transformers, and remote receiver modules. Inside a metal operator box in direct sun, temperatures can exceed 140°F even when it’s 100°F outside. Wooden gates also dry out and crack at the hinges. We recommend a spring inspection for any Pomona gate, checking board condition, capacitor swelling, and wood moisture. The repair is cheaper in April than it is after failure in August.
Usually, yes. Pomona’s clay soil expands and contracts through wet and dry seasons, causing concrete slide gate tracks to heave or settle unevenly. The rack and pinion then mesh incorrectly, producing the grinding sound. We re-level the track, re-align the rack, and adjust the pinion engagement so the drive system runs clean. Left untreated, the grinding strips the rack teeth and the replacement cost doubles. If you hear it, call (833) 734-5599 sooner rather than later.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Pomona’s older homes with legacy hardware, LiftMaster, FAAC, and Linear are the most common operators we repair or retrofit. We carry common parts for these brands in our service vehicles, which speeds up same-day fixes considerably. A brand-specific dealer can’t do that across systems; we can.
We recently serviced a swing gate in the 91766 ZIP off Holt Avenue where the original LiftMaster operator had a failed control board and the wooden gate dragged after winter rains. Our tech replaced the board, corrected the sag by re-setting the hinge post footing in the clay soil, and installed safety photocells to meet current code. The homeowner avoided a full replacement and the gate has run cleanly through two winters since.
Call First Light Gate Repair in Pomona Today
If your electric gate is stuck, grinding, silent, or refusing to respond to the remote, don’t wait for the problem to lock you out or leave you open. Call (833) 734-5599 and talk to a gate specialist, not a call center. We’ll give you a straight answer, a free estimate, and a price you’ll agree to before any work starts. From Pomona’s oldest tract homes to commercial properties on Mission Boulevard, we show up knowing what we’re looking at. That’s the whole point of being a gate-only shop.
Written by Glen Pacheco, Owner at First Light Gate Repair, serving Pomona and the surrounding valley since day one.