Gate Company in Chino — On-Site in 60 Minutes, Fixed the Same Day

Same-day gate service with the price agreed before we start. Licensed and insured engineers covering repairs, operators and access control across the whole area.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Call Now — 24/7 Dispatch

We answer around the clock

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Chino, CA

Gate installation in Chino splits between two worlds: the HOA-governed subdivisions around 91708 where wrought-iron and vinyl driveway gates need architectural review approval, and the older horse-property parcels around 91710 with wide ranch-style tube gates and long driveways. First Light Gate Repair has served Chino since 2014, working across both ZIP codes with the same focused trade. We install automatic and manual gates that hold up to Santa Ana wind loads and clay-heavy soil movement, and we quote the full job before any work starts. Call (833) 734-5599 for a free estimate.

Call (833) 734-5599

Why Chino Homes Are Different

Chino’s gate problems start in the soil. The clay-heavy ground under much of the city expands when wet and contracts when dry, which means gate posts shift with the seasons. A gate that swings clean in August drags by January, not because the hinges wore out but because the post moved. We routinely re-plumb posts and re-hang hardware on Chino gates rather than just adjusting the gate leaf, because adjusting a gate on a tilted post buys weeks, not years.

The Preserve and College Park subdivisions in 91708 add another layer: HOAs there govern gate style, finish, and height. Homeowners can’t just swap a broken wrought-iron gate for any replacement; it has to match architectural review standards. That’s a different job than the semi-rural parcels in 91710, where ranch tube gates and chain-link on horse properties are built for function and wide openings. A Chino gate tech has to be fluent in both decorative HOA work and heavy-duty rural hardware. The hot, dry inland summers don’t help either – UV breaks down vinyl and powder-coat finishes, and Santa Ana wind events stress hinges and latches on exposed corner lots.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Our Main Chino Services

The two services Chino homeowners call us about most are gate repair and electric gate repair – one for the structure and hardware, one for the motor, board, and operator. Here’s what each involves in Chino.

Gate Repair in Chino

Sagging gates, dragging leaves, broken hinges, and latches that won’t catch are the common calls from both Chino ZIP codes. In 91710, the wide, heavy tube gates on horse properties put real stress on posts and hinges, especially after wind events. In 91708, decorative iron gates corrode at the welds over time and need fabrication that matches the original finish. We diagnose the gate leaf, posts, hinges, and latch as one system and fix what actually failed. Gate Repair in Chino covers the full scope with upfront pricing.

Gate Repair in Chino

Electric Gate Repair in Chino

When an automatic gate stops responding, the problem is usually the control board, the motor, a safety sensor, or the power supply – not always the obvious part. Chino’s high-wind days can knock sensors out of alignment, and summer heat strains motors on gates that cycle dozens of times a day in busy subdivisions. We troubleshoot across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the diagnosis isn’t tied to one manufacturer’s playbook. Electric Gate Repair in Chino covers motorized systems from swing arms to slide operators.

Electric Gate Repair in Chino
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 734-5599

What happens when you call

  1. 1
    A real person answersNo phone trees — you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Gate Installation in Chino

Gate installation in Chino means matching the job to the property: a decorative wrought-iron gate for a 91708 HOA lot, or a heavy-duty tube gate for a 91710 horse property with a wide driveway and corral access. The climate and soil demand proper post depth and reinforcement, because Chino’s clay shifts and Santa Ana winds test every weld and hinge. We install both manual and automatic gates, and every job starts with a free measure and a written price before any work begins. For the full scope, see Gate Installation.

Automatic Gate Installation

Signs you need it

You’re opening and closing a heavy gate by hand multiple times a day, or you want controlled access to a driveway that opens onto a busy Chino street.

What it costs in Chino

Automatic gate installation in Chino typically runs $4,500 to $11,000, depending on gate length, operator type, and whether we’re pulling new power to the gate.

How we do it

We measure the driveway, confirm swing or slide geometry, install the operator and safety edges, run power and low-voltage wiring, and program remotes and keypads.

Driveway Gate Installation

Signs you need it

Your existing gate is rotted, rusted through, or too narrow for the vehicles you now drive, or you’re adding a gate to a driveway that never had one.

What it costs in Chino

Driveway gate installation for a standard single or double swing setup in Chino falls between $2,500 and $7,000 for the gate, posts, and hardware, before any automation.

How we do it

We set posts below the frost line with concrete on undisturbed soil, hang the gate on adjustable hinges, and align the latch and stops so the gate closes true.

Sliding Gate Installation

Signs you need it

Your driveway slopes upward or has limited swing clearance, or a swing gate would block the driveway when open.

What it costs in Chino

Sliding gate installation in Chino generally starts around $3,500 and runs to $9,000, with the higher end covering cantilever hardware and longer track systems.

How we do it

We lay the track or V-groove system, set the roller hardware and guide posts, hang the gate, and test slide travel under load before final anchoring.

What Gate Installation Costs in Chino

Item Typical range in Chino
Manual driveway gate, installed $2,500 – $7,000
Automatic gate with operator and controls $4,500 – $11,000
Sliding gate installation $3,500 – $9,000

Chino’s clay soil and HOA finish requirements can push these numbers toward the top of the range. You’ll always know the full price before we start.

Does Chino require a permit for gate installation?

A permit is often required for automated gates with electrical runs, and HOA-governed communities like The Preserve require design review before installation starts. We’ll confirm what your specific neighborhood needs before quoting the job. Call (833) 734-5599 to talk it through.

Can you install an automatic gate on a horse property in 91710?

Yes. Wide driveway and corral gates need heavier-duty hardware and sometimes solar-powered operators where running power isn’t practical. We size the operator to the gate weight and cycle count. Call for a free site measure.

Brands We Service in Chino

We bring working knowledge of nine gate brands to every Chino job, including Viking and DoorKing for commercial-grade operators and Ghost Controls and Elite for residential automation. Our brands page has the full list. Parts for common failures are stocked in our service vehicles, which keeps most Chino repairs to a single visit.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Chino, CA

Service Typical range in Chino
Gate repair diagnostic $50 – $150
Hinge repair or replacement $150 – $450
Weld repair, on-site $100 – $500
Gate post reset or replacement $350 – $900
Controller board replacement $400 – $1,600
Operator motor replacement $600 – $1,800
Safety sensor or loop repair $150 – $500
Manual driveway gate, installed $2,500 – $7,000
Automatic gate with operator and controls $4,500 – $11,000
Sliding gate installation $3,500 – $9,000

What pushes price up in Chino: heavy ranch gates in 91710 that need reinforced posts, HOA finish-matching on wrought iron in 91708, and power runs longer than 50 feet from the panel. Every quote is written, explained, and agreed to before work starts – no surprise invoices.

Neighborhoods We Serve in Chino

We work throughout both Chino ZIP codes, from the master-planned streets of The Preserve and College Park to the horse-property parcels on the east and south edges of the city. Most Chino jobs get same-week scheduling, with emergency repair prioritized.

  • The Preserve
  • College Park
  • Butterfield Ranch
  • Pine Avenue corridor
  • Euclid Avenue parcels

Service Area – Cities Near Chino

First Light Gate Repair is based in Anaheim and covers Chino plus nearby communities including Los Serranos, CA, Yorba Linda, CA, Pomona, CA, and Brea, CA. If you’re on the edge of Chino, call (833) 734-5599 and we’ll confirm coverage for your address on the spot.

Serving Chino, CA — Our Local Coverage Area

We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs About Gate Company in Chino

Ready to get started? Free estimates · same-day response in Chino
Call (833) 734-5599

What happens when you call

  1. 1
    A real person answersNo phone trees — talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Chino Customers Say

★★★★★ 4.8 from 9+ reviews

"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."

— Marisol Hernandez

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

— Travis Hayes

"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."

— Ruben Garcia

How It Works in Chino

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote — no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Chino — typically within 30–60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Chino — we'll get back to you fast. No obligation.

When you send us your details, you agree to our Privacy Policy and authorize us to contact you through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch