Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Cypress, CA
Gate installation in Cypress usually means replacing a 50-year-old wood driveway gate that’s been racking against settled concrete since the Johnson administration, not bolting a modern automated system onto a new build. Cypress is a master-planned postwar suburb, and most of its single-family homes went up as tract housing between the 1950s and 1970s. That means we spend our days here re-hanging warped wood swing gates, squaring wrought-iron pedestrian gates, and setting new posts where the original ones rotted at the soil line. If your gate drags, sags, or won’t latch, call First Light Gate Repair at (833) 734-5599 for a free estimate.
Why Cypress Homes Are Different
Cypress sits in the coastal-influenced inland Orange County basin, where hot, dry summers and Santa Ana wind events do real work on wood gates. The heat pulls moisture out of the boards, so they crack and warp. The Santa Anas push against the gate’s face, loosening hinges and stressing post connections. Ground settle happens in the dry season too, which is why we see a cluster of sagging and dragging gate calls in late summer and fall, right when the soil has contracted the most.
The housing stock matters just as much as the weather. Most of Cypress is 1950s to 1970s single-story ranch and cul-de-sac tract homes on small lots, built largely by the Larwin Company around the original Cypress College and Los Alamitos race track area. Those original wood picket, side-yard, and driveway-swing gates are still in service on a lot of properties. The concrete aprons and gate piers have settled over six decades, so gates rack out of plumb and scrape against the driveway. In the 1960s Larwin-era tracts specifically, side-yard gates often share a fence post with the neighbor’s block wall, and that post has usually rotted underground. We regularly find gate failures here that are actually fence-post failures. No hinge adjustment will hold until the post is replaced.
That’s the recurring Cypress job: not a new custom estate gate, but a sagging, dragging wood gate on a cracked original concrete apron in a ranch-style tract home, or a rotting post underneath a side-yard gate that no longer closes. The work is more about restoration and proper re-hanging than new installation.
Styles & brands we work with
Our Main Cypress Services
Cypress homeowners call us most often for two things: a gate that won’t close or latch, and an electric gate that stopped opening. Here’s what each involves in this city.
Gate Repair in Cypress
Most Gate Repair in Cypress calls start with a wood driveway gate dragging across concrete or a wrought-iron pedestrian gate that’s dropped off its hinges. In Cypress, the root cause is usually settlement, not hardware failure. Original concrete piers have shifted, wood posts have softened at the soil line, and the gate itself has warped in the dry heat. We re-hang gates, replace rotted posts, reset hinge points, and adjust latch alignment so the gate swings smoothly and stays closed. The fix is structural, not cosmetic.
Electric Gate Repair in Cypress
Electric gates in Cypress are mostly retrofit systems on older wood or iron gates, and the call we get most is “the gate stopped moving.” That usually points to a failing operator, a dead battery backup, or a sensor knocked out of alignment. We diagnose the motor, the control board, and the safety edges, not just the obvious part. Electric Gate Repair in Cypress covers operators, remotes, keypads, loop detectors, and limit switches across multiple brands. Your gate is the only thing we fix.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Cypress
Gate installation in Cypress is rarely a blank-slate job. Most of these homes are 50 to 70 years old, and the original gate has lived through six decades of Santa Ana winds, dry summers, and concrete that’s shifted enough to throw every measurement off. The job usually starts with removing rotted posts and discovering the pier underneath is cracked too. A new gate here has to be set square on ground that’s no longer square, which is why measuring once and hoping for the best doesn’t work. We plan for settled concrete and rebuild the post foundation before hanging anything. This is the core of our Gate Installation work in Cypress.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand every day, or the gate is too heavy for a standard operator to move reliably.
What it costs in Cypress
Automatic gate installation in Cypress typically falls in the $3,500 to $9,000 range depending on opener type, gate weight, and whether new posts or concrete work are required.
How we do it
We check the gate’s existing hinge and post condition first, then mount the operator, run the power, set travel limits, and test the safety reverse and obstruction sensing through full cycles.
Driveway Gate Installation
Signs you need it
The old swing gate hangs off-level, drags against the driveway apron, or has rotted through at the bottom rail.
What it costs in Cypress
Driveway gate installation in Cypress runs from $1,800 to $6,500 for a new swing gate, with the higher end covering larger custom steel or automated layouts.
How we do it
We pull the old gate and posts, set new pressure-treated or steel posts in concrete below the rot line, then hang the new gate on adjustable hinges and confirm it latches square from full open to full close.
What Gate Installation Costs in Cypress
| Item | Typical range in Cypress |
|---|---|
| New driveway swing gate (wood or steel) | $1,800 – $6,500 |
| Automatic gate opener added to existing gate | $2,000 – $5,500 |
| Full automatic gate system with new gate | $3,500 – $9,000 |
Costs in Cypress run higher when we’re replacing rotted fence posts along a shared property line or cutting back settled concrete so the new gate clears the apron. The price is quoted and agreed before any work starts, so the number on the invoice matches the number on the estimate.
Can you install a gate on a settled concrete driveway in Cypress?
Yes. We either shim and adjust the hinge geometry so the gate clears the uneven apron, or we cut and patch the concrete where it’s heaved. In Cypress, post-leveling comes before any gate gets hung, because the old piers are rarely still square after 50-plus years.
How long does a new gate installation take in Cypress?
Most wood or steel swing gate installations take one full day once materials are on site. If we’re replacing rotted posts or doing concrete work, expect a second day for the concrete to cure enough to hang the gate. We schedule this work, so we’ll give you a written time frame at the estimate.
Brands We Service in Cypress
We work on gates from Viking, Ghost Controls, DoorKing, Elite, and five other major brands, so we don’t show up tied to one manufacturer’s playbook. Our brands coverage means we can diagnose a Ghost Controls residential opener on one street and a DoorKing commercial operator two blocks over. We keep the most common replacement boards, remotes, and sensors stocked locally, which keeps turnaround short in Cypress.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Cypress, CA
| Service | Typical range in Cypress |
|---|---|
| Gate repair (re-hang, hinge, latch) | $150 – $550 |
| Rotted post replacement | $350 – $900 |
| Wood gate rebuild | $400 – $1,400 |
| Electric gate diagnostic | $95 – $225 |
| Opener or control board repair | $250 – $800 |
| Safety sensor or photo eye replacement | $150 – $400 |
| Driveway gate installation (swing) | $1,800 – $6,500 |
| Automatic gate opener installation | $2,000 – $5,500 |
| Full automatic gate system | $3,500 – $9,000 |
Two things push gate repair and installation prices up in Cypress: rotted posts hidden behind stucco or block wall, and settled concrete that requires cutting or shimming to restore clearance. Whatever the estimate, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Cypress
We work throughout the 90630 ZIP code, including the older Larwin-era tracts where post rot and settled piers are the constant theme. Response for gate emergencies in Cypress is typically same-day when we’re already in the area.
- Larwin tract neighborhoods near Cypress College
- Original ranch tracts off Katella and Valley View
- 1960s cul-de-sac developments near Lexington
- Neighborhoods west of Valley View near the Los Alamitos border
- Single-story tract areas around Oak Knoll Park
Service Area – Cities Near Cypress
First Light Gate Repair serves Cypress and the surrounding north Orange County and west Orange County areas. We also handle gate work in La Palma, CA, Stanton, CA, Buena Park, CA, and Garden Grove, CA. Same gate problems, same housing era, and the same settled concrete, just a few exits away.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cypress
We aim for same-day response on gate emergencies in Cypress when we’re already working in the area. A stuck-open gate is a security problem, and a stuck-closed gate blocks the driveway. Call (833) 734-5599 and we’ll tell you exactly when we can be there.
Most straightforward gate replacements in Cypress don’t require a permit, but adding a new automated system or running new electrical work can trigger one depending on the City’s current requirements. We’ll tell you what applies to your specific project before we quote anything.
We schedule Cypress work Monday through Saturday, with repair and diagnosis jobs prioritized earlier in the week so parts can arrive before the weekend. Installations are scheduled as full appointments, not squeezed between service calls, so you’ll get a start time and a realistic completion window.
If your gate is dragging, rotted, or refusing to open, call First Light Gate Repair at (833) 734-5599. We’ll give you a straight answer and a free estimate, quoted before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cypress Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Carmen Vargas"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Luis Rodriguez"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Alejandro Guzman